1.金属本构理论与测量技术

2.塑性成形多尺度建模分析

3.材料变形与断裂机制

1.国家自然科学基金面上项目（52175322），考虑应变路径相关性的GP区强化铝合金板材机器学习本构模型，2022.01-2025.12

2.钣金制造机器人自动化生产线集成系统-机器人钣金折弯离线编程技术，国家重点研发计划(智能机器人) 子课题（2018YFB1309203），2019.06-2022.05

3.铝合金薄壁类零件的半固态流变铸造技术（应用示范类）-基于半固态流变成形的高性能铝合金设计（2018YFB2001800），国家重点研发计划(制造基础技术与关键部件)课题（2018YFB2001801），2019.07-2022.06

4.基于精准局域组织预控制的镁合金复杂冲压件的成形及组织性能演变规律，国家自然科学基金-山西煤基低碳联合基金（U1810208）子课题，2019.01-2022.12。

5.汽车铝合金锻件高温精密锻造成型技术开发，吉林省科技厅技术攻关项目（20190302059GX），2019.01-2021.12。

6.基于有限元辅助试验技术的板材成形极限精确研究，国家自然科学基金面上项目（51575230），2016.01~2019.12。

7.温热态板材成形极限的预测理论及试验测量，教育部回国人员科研启动基金，2015.01~2016.12。

8.热电材料Bi2Te3的高温超塑性研究，国家自然科学基金国际合作交流（51310105007），2013.01~2013.12。

9.超塑性大延伸率变形力学机制的理论和试验研究，国家自然科学基金青年基金（51005098），2011.01~2013.12。

1.Zhi-ping GUAN, Ming-yu LI, Kai-xin XIA, Zhi-gang LI, Dan GAO, Po ZHAO, Pin-kui MA, Jia-wang SONG. Microstructure, mechanical properties and wear resistance of SiCp/AZ91 composite prepared by vacuum pressure infiltration, Transactions of Nonferrous Metals Society of China, 2022, 32(1):104-121,

2.Yongsen Yu, Zhiping Guan*, Mingwen Ren, Jiawang Song, Pinkui Ma, Hongjie Jia. A Versatile Punch Stroke Correction Model for Trial V-Bending of Sheet Metals Based on Data-Driven Method. Materials, 2021, 14:4790.

3.Guanyi Wang, Zhiping Guan, Jinguo Wang, Mingwen Ren, Ruifang Yan, Jiawang Song. Effect of Cooling Rate and Modification by Strontium on the Thermal Conductivity of Al-8Si Alloy. Metals.2021, 11:1334.

4.Junfu Chen, Zhiping Guan, Jingsheng Xing, Jiawang Song, Dan Gao, Mingwen Ren, Po Zhao. Methods for measuring friction-independent flow stress curve to large strains using hyperbolic shaped compression specimen. Journal of Strain Analysis for Engineering Design. 2022, 57(1):23-27

5.Junfu Chen, Zhiping Guan, Changhai Yang. Inverse determination of the flow curve in large range of strains for cylindrical tensile specimen. Journal of Mechanical Engineering Science, 2020, 234(11): 2256-2265.

6.Junfu Chen, Zhiping Guan, Jingsheng Xing, Dan Gao, Mingwen Ren. A novel method to determine full-range hardening curve for metal bar using hyperbolic shaped compression specimen. Journal of Materials Research and Technology, 2020, 9(3): 2704-2716.

7.Junfu Chen, Zhiping Guan*, Pinkui Ma, Zhigang Li, Dan Gao. Experimental extrapolation of hardening curve for cylindrical specimens via pre-torsion tension tests. Journal of Strain Analysis for Engineering Design. 2020, 55(1-2): 20-30

8.Zhiping Guan, Junfu Chen*, Pinkui Ma, Yuquan Song, Changhai Yang. A novel method for quantitative analysis on the post necking behavior during uniaxial tension. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2019, 41(10):438

9.Junfu Chen, Zhiping Guan*, Pinkui Ma, Zhigang Li, Xiangrui Meng. The improvement of stress correction in post-necking tension of cylindrical specimen. Journal of Strain Analysis for Engineering Design. 2019, 54(3): 209-222.

10.王慧远, 张行,徐新宇, 查敏, 王珵, 马品奎, 管志平*. 超塑性轻合金组织稳定性的研究进展及展望. 金属学报, 2018, 54(11): 1618-1624

11.陈俊甫, 管志平, 杨昌海, 牛晓玲, 姜振涛, 宋玉泉. 金属棒试样拉伸和扭转试验应变范围和力学特性对比. bwin必赢登录入口官网学报（工学版）, 2018, 48(4): 1153-1160

12.HY Wang, EB Zhang, XL Nan, L Zhang, ZP Guan*, QC Jiang. A comparison of microstructure and mechanical properties of Mg-9Al-1Zn sheets rolled from as-cast, cast-rolling and as-extruded alloys. Materials & Design, 89, pp167-172, 2016.

13.ZP Guan*. Quantitative analysis on the onset of necking in rate-dependent tension. Materials & Design, 56, pp209-218, 2014.

14.ZP Guan*, MW Ren, P Zhao, PK Ma, QL Wang. Constitutive equations with varying parameters for superplastic flow behavior of Al–Zn–Mg–Zr alloy. Materials & Design, 54, pp906-913, 2014.

15.ZP Guan*, MW Ren, HJ Jia, P Zhao, PK Ma. Constitutive equation with varying parameters for superplastic flow behavior. Journal of Materials Engineering and Performance, 23, pp791-798, 2014.

16.ZP Guan, D Dunand*. Compressive creep behavior of cast Bi2Te3. Materials Science and Engineering A, 565, pp321-325, 2013.

17.管志平, 马品奎*, 宋玉泉. 超塑性拉伸断裂分析. 金属学报, 49, 1003-1011, 2013.